IMPORTANT INFORMATION
Dear visitor,
Please take into account that some notes apply to the specifications that you are downloading as stated in the Technical Specification for Interoperability relating to the Control-Command and Signalling subsystems of the rail system (TSI CCS).
Hereafter, the notes applying to Table A2 of the TSI CCS and to the documents that you are downloading:
Note 7 : Only the (MI) requirements are mandated by TSI CCS.
Note 3 : Index 48 refers only to test cases for GSM-R mobile equipment. It is kept ‘reserved’ for the time being. When agreed in a future revision of the TSI, the catalogue of available harmonised test cases for the assessment of mobile equipment and networks, according to the steps indicated in point 6.1.2 of this TSI, will be introduced in these tables.
Note 1 : The points of the specifications listed in point 2.1 of EN 301 515 which are referenced in Index 32 and Index 33 as ‘MI’ are mandatory.
Note 2 : The change requests (CRs) listed in table 1 and 2 of TS 102 281 which affect points referenced in Index 32 and Index 33 as ‘MI’ are mandatory.
Note 6 : This document is ETCS, RMR and ATO baseline independent.
Note 8 : These specifications, as regards to ETCS and ATO on board equipment, shall be fully implemented.
Note 9 : These specifications, in their current version, as regards to FRMCS on-board equipment, are not considered complete for the purpose of tendering the on-board equipment.
Documents referenced as “ Reserved” in Table A2 of the TSI CCS are not included in this downloading action.
Please be aware that the CEN, CENELEC and ETSI standards or UIC documents are not the property of the EU Agency for Railways and are only provided for information. They are CEN, CENELEC and ETSI standards or UIC documents and can be procured via these organizations.
Please visit the corresponding website to get more detailed information on their standards.